5
www.factorelectronics.com
Panel Descriptions
TX Transmitter Front Panel
1. Active Input LED indicator
– Illuminates when an Active HDMI/VGA signal is
connected
2. Link LED indicator
– Illuminates when the HDBT Out on the TX unit is properly
connected to the HDBT In on the RX unit.
3. Input selection button
– Press to switch between HDMI and VGA inputs
4. IR Out port
– 3.5mm mono phone-jack, connect to the IR emitter cable
5. IR In port
– 3.5mm stereo phone-jack, connect to the IR receiver cable
6. VGA Input
– Connect a VGA cable from this port to a VGA source.
