➀ Factbird® VIEW
➁
➂
factbird.com
INSTALLATION GUIDE
Factbird® VIEW
1/2
Factbird® VIEW Hardware Setup
➁ USB Camera
Power
indicator
Connect ➁USB camera to ➀Factbird® VIE
Connect ➂power supply unit to ➀Factbird® VIE
Plug into power and check if the power indicator light turns on
After a minute, you will see a WiFi-hotspot
called ‘Factbird-View-xxxxx’ on your smart
phone (or computer, tablet). Connect to the
hotspot. You will be redirected to a page
where you can select your company’s WiFi
and enter the password.
Note: Factbird® VIEW works with WiFi where users select WiFi and enter password. (Not applicable for WiFi that requires
authentication using captive portal including WPA2-Enterprise. e.g. WiFi that requires registration on a browser)
1
Connect Ethernet cable to Factbird® VIEW
2
Connecting a camera and power supply unit
Connecting Factbird View to the internet
➂ Power supply unit
Using Ethernet
or
Using WiFi
➀
