Page
7
with
23
Page
7
with
23
Page
7
with
23
Page
7
with
23
MANUAL - KRAMER Technik MIG / MMA 185
Unit nameplate:
The accessories supplied with the device:
1. Source of electricity
1. Source of electricity
2. Torch MIG / MAG integrated device
2. Torch MIG / MAG integrated device
3. Cable to the common terminal
3. Cable to the common terminal
4. Cable with electrode holder
4. Cable with electrode holder
5. gas pipe
5. gas pipe
6. Welding mask
6. Welding mask
7. Brush
7. Brush
8.
Operating instructions in j. Polish
5. OPERATION
5. OPERATION
AND. BEFORE WORK:
AND. BEFORE WORK:
•
Before starting work, you must specify the place where the device is to be operated.
•
Check voltage value, phase and frequency of the supply current before switching the machine to the mains.
•
Parameters supply voltage are given in the section of the technical data and on the nameplate.
•
Check the grounding wire connection device from the mains.
•
Remove all flammable material from the welding area.
•
Do not use the device on a surface, which may cause it to tip over
•
Welding use suitable protective clothing: gloves, lab coat, shoes, helmet or mask having a corresponding
certificate.
Содержание KRAMER MIG/MMA 185
Страница 1: ...ORIGINAL INSTRUCTIONS 2018 MANUAL WELDING...
