manualshive.com logo in svg

Fabritec designs Sonesse (Ultra Quiet) 506 Motor, Инструкция по установке, Страница: 1 / 4

Поделиться
Скачать
Fabritec designs Sonesse (Ultra Quiet) 506 Motor Скачать руководство пользователя страница 1

page

 1 

of 

4

SONESSE (Ultra Quiet)

506 MOTOR

INSTALLATION INSTRUCTIONS

SONESSE (Ultra Quiet) 506 
MOTORS 

INSTALLATION INSTRUCTIONS

Thank you for purchasing your new Sonesse (Ultra 
Quiet) 506 Motor. They have been custom-made from 
the highest quality materials to the dimensions you 
specified. With the proper installation and care, it will 
provide you with many years of beauty and trouble-
free use.

Please read all instructions before you start so you will 
be familiar with the overall process. 

Make sure you measure your window to ensure the 
motors and shades will fit properly before beginning.

Getting Started

Remove the motor and shade from the packaging.
Keep the packaging until you have successfully installed the 
motorized shade.

PLEASE NOTE:

This is a 

very powerful heavy motor

 and 

the brackets have 

to be secured and attached to wood studs.
FASTENERS CANNOT BE USED!

Often, wood headers are found above the windows. If this 
is not possible, and you can’t secure the shade brackets to 
the wood studs, then plan on using a Headbox.
Headbox brackets can be located and attached to the 
wood studs.

• Pencil

• Power Drill with the following bits:

• Awl

   - 

¹⁄₁₆

” Drill Bit

• Tape Measure

   - 

¹⁄₄

” Hex Driver

• Level

   - Standard Screwdriver

• Ladder or Stepstool

   - Masonry Drill Bit (if drilling into concrete
     or brick)

Содержание Sonesse (Ultra Quiet) 506 Motor

Страница 1: ...e motors and shades will fit properly before beginning Getting Started Remove the motor and shade from the packaging Keep the packaging until you have successfully installed the motorized shade PLEASE NOTE This is a very powerful heavy motor and the brackets have to be secured and attached to wood studs FASTENERS CANNOT BE USED Often wood headers are found above the windows If this is not possible...

Страница 2: ...bracket dimension is the shade cloth width plus 1 Use a level to ensure a horizontal position a Install the idler end bracket first STEP 1 INSTALLING THE BRACKETS continued b Next install and mount the motor end bracket See illustration below STEP 2 INSTALLING THE IDLER END OF SHADE a Begin by slipping the idler end spacer over the idler shaft on the roller shade Make sure the spacer is snug and b...

Страница 3: ...et Make sure the cord is positioned toward the back of the bracket While keeping the idler end in position lift the shade up into the bracket easing the motor head into the motor end bracket b After installing the motor end slip the retainer clip onto the motor end This prevents the motor from slippping out of its bracket Make sure the retainer clip sits in the bracket channel See illustrations be...

Страница 4: ...if you have any questions STEP 4 CONNECT YOUR POWER SOURCE AND TEST THE SHADE Please note your shades are preset at the factory If limit adjustments are required refer to the programming instructions These can be found in the remote controller shipping box STEP 5 MOUNT REMOTE CONTROLLER HOLDER a Mount your remote controller holder to the wall b Insert your remote contoller into the holder c Congra...

Отзывы:

Нет отзывов