FabiaTech Low Power FB2403 Скачать руководство пользователя страница 60

Страница: 60 / 80

FabiaTech Corporation

LAN Driver

Windows XP Driver

To install the LAN driver, insert the DVD ROM into the DVD ROM device,

and enter DRIVER>LAN>DMPDX3>XP. If your system is not equipped with
a DVD ROM device, copy the LAN driver from the DVD ROM to a CF or

USB flash driver.

Open Control Panel. [Start->Settings->Control Panel].

Click on System button> Select Hardware >click on Device Manager.

Click on Other Device > Ethernet Controller >Update Driver >

Select

Specify a location >

Browse >

Select “NETRDC” file from CF.

Click on OK >Next >Yes >Finish

Note

: In the LAN > DMPDX3 > DOS >NDIS directory, provide NDIS device drive for

DOS.

BIOS Flash Utility

In the <UTILITY> directory, there is the biosmp.exe file.
Step 1:

Copy the BIOSMP.EXE update BIOS tool and 2403VXXX.ROM files to a
DOS bootable CF or USB flash driver.

Step 2:

Boot from USB stick or CF.(Compact Flash)

Step 3:

Use the “

BIOSMP -u 2403Vxxx.rom

”

program to update the new BIOS

Step 4:

Power off the system or press CTRL+DEL “reset” the CPU card, when BIOS

update is successful the message will show “

Update BIOS …..OK

”.

Step 5:

Restores BIOS default, when updates the BIOS and reboots the CPU card
at the first time.

Note

: *. Please make sure the BIOS version is correct for the CPU board.

**. Do not power off during this BIOS update.

Содержание Low Power FB2403

















































































Результаты поиска

Содержание Low Power FB2403

Отзывы:

Бренды по названию

Популярные бренды

FabiaTech Low Power FB2403, Руководство пользователя

Результаты поиска

Содержание Low Power FB2403

Отзывы:

Бренды по названию

Популярные бренды