FabiaTech FB2402, Руководство пользователя

Страница: 57 / 77

FabiaTech Corporation
51
Chapter 5 Driver and Utility
The enclosed diskette includes FB2402 VGA and LAN driver. To install and configure
you FB2402 system, you need to perform the following steps.
VGA Drivers
¾
WINDOWS Driver
1 To install the VGA driver, insert the CD ROM into the CD ROM device, and
enter DRIVER>VGA>Vortex86DX3. If your system is not equipped with a
CD ROM device, copy the VGA driver from the CD ROM to a CF.
2 Execute M2015_R5.msi file.
3 The screen shows the SETUP type. Press any key to enter the main menu.
4 As the setup is completed, the system will generate the message as
follows.
Yes, I want to restart my computer now. Installation is done!
No, I will restart my computer later.
System must be restart then complete the installation.
5 In the WINDOWS XP, you can find the <DISPLAYL> icon located in the
{CONTROL PANEL} group.
6 Adjust the <Refresh Rate>, <Cursor Animation>, <Font size>, <Resolution>,
and <Big Cursor>.
Note : If user uses Windows XP operation system, need the update Windows XP
service pack2 is provide VGA driver.