FabiaTech Corporation
48
Security setup
There are two security passwords: Supervisor and User. Supervisor is a privileged
person that can change the User password from the BIOS. According to the
default setting, both access passwords are not set up and are only valid after you
set the password from the BIOS.
• Change Supervisor Password
• Change User Password
• Boot Sector Virus Protection
To set the password, please complete the following steps.
1.
Select
Change Supervisor Password.
2.
Type the desired password (up to 6 character length) when you see the
message, “Enter New Supervisor Password.”
3.
Then you can go on to set a user password (up to 6 character length) if
required. Note that you cannot configure the User password until the
Supervisor password is set up.
4.
Enter Advanced BIOS Features screen and point to the Security Option field.
5.
Select System or Setup.
Содержание FB2402
Страница 5: ...v Dimension 71 ...
Страница 6: ...vi ...
Страница 12: ...FabiaTech Corporation 6 ...
Страница 26: ...FabiaTech Corporation 20 ...
