Faber e-MatriX 800-500 ST LL, Руководство пользователя, Страница: 11 / 24

Manual e-MatriX 800/500 RD,ST (LL)
--------------------------------------------------------------------------------------------------------------------------------------
11 < < < <
4 Installation instructions
4.1 Preparing the fire

Ensure that all packing items are removed.

Remove the transport screw on the front see fig. 1.0.

Remove the front glass and store it at a safe place see Chapter 5.

Remove the fuel bed and store it at a safe place see Chapter 6.
4.2 Placing the fire
For a proper functioning of the fire, always ensure that the fire is levelled.
4.2.1 Floor standing
Place the fire at the right position and fix it on the wall see fig. 1.1a or 1.1b.
4.3 Installation and finishing
4.3.1 e-MatriX-RD (see fig. 1.0)
4.3.1.1 With cover strip "A"
Build the false chimney breast or plateau against distance holder B.
4.3.1.2 Without cover strip "A"
Remove distance holder B around. Build the false chimney breast or plateau against the
appliance.
4.3.2 e-MatriX-ST (see fig. 1.2)
4.3.2.1 With cover strip "A"
Build the false chimney breast or plateau against the appliance.
4.3.2.2 Without cover strips "A"
- Remove the cover strips A. See fig. 1.2.
- Build the false chimney breast or plateau against the appliance.
4.4 Control box
!! Place the Control box at an accessible location behind the service door.
See Chapter 13.5 and 13.7.
4.4.1 Electric connection

Use the supplied extension cable to connect the Control box to the Engine. See fig. 4.0-B.

Lead the DC cable, inside the Engine, to the Control box and connect it. See fig. 4.0-A.
- Max. cable length from the center of the fire to the left 1,5m and to the right 1,0m.
See fig. 1.1a or 1.1b.

Connect the supplied mains lead. See fig. 4.0-C.
If desired, a 2m extension set is available.