Faber e-MatriX 800-500 I, Руководство пользователя, Страница: 5 / 12

User manual e-MatriX heat
4 < < < <
Warning:
This appliance must be earthed.
The use of an extension lead or multi-plug
adaptor is not advised when connecting
this product to the mains. Connection
through these devices could lead to a risk
of overloading, overheating and even fire
at the extension lead or adaptor due to
inadequate connection quality.
This heater must be used on an
~alternating current supply (~) only and
the voltage marked on the heater must
correspond to the supply voltage.
Do not use this appliance in series with a
thermal control, a program controller, a
timer or any other device that switches on
the heat automatically, since a fire risk
exists when the appliance is accidentally
covered or displaced.
DO NOT use the heater on deep pile
carpets or the long hair type of rugs, or
less than 750mm (30”) away from any
overhanging surface. Keep combustible
materials such as drapes and other
furnishings clear from the front, sides and
rear of the heater. Do not use heater to
dry your laundry. In the event of a fault
unplug the appliance. Unplug the
appliance when not required for long
periods.
The appliance must be positioned so that
the plug is accessible. If the supply cord is
damaged it must be replaced by the
manufacturer or service agent or a
similarly qualified person in order to avoid
a hazard. Keep the supply cord away from
the front of the appliance.
CAUTION:
SOME PARTS OF THIS PRODUCT CAN
BECOME VERY HOT AND CAUSE BURNS.
PARTICULAR ATTENTION HAS TO BE GIVEN
WHERE CHILDREN AND VULNERABLE
PEOPLE ARE PRESENT.
Warning:
In order to avoid overheating, do not
cover the appliance. Do not place material
or garments on the appliance, or obstruct
the air circulation around the appliance,
for instance by curtains or furniture, as
this could cause overheating and a fire
risk. The appliance carries a DO NOT
COVER warning.
Warning:
In order to avoid a hazard due to
inadvertent resetting of the thermal cut-
out, this appliance must not be supplied
through an external switching device, such
as a timer, or connected to a circuit that is
regularly switched on and off by the
utility.
The water sump in this product is treated
with a biocidal product, Silver Biocide in
order to control harmful or unwanted
organisms. This conforms with the latest
relevant ISO standard.
Do not drink the water from the water
sump.
If you intend not using the appliance for
longer than 2 weeks, remove and empty
the water sump.
Cleaning and maintenance
The device must be cleaned and checked by a
qualified specialist to ensure the safe use and to
guarantee a long service life.
The outside of the fire can be cleaned with a clean
damp cloth.
Cleaning of the glass
Remove the glass as described in the installation
instructions. The glass can be cleaned with glass
cleaner. Never use aggressive cleaning agents or
abrasive products.
General

Please note!
Used in an environment where background
noise is very low, it may be possible to hear a
sound which is related to the operation of the
flame and heat effect. This is normal and
should not be a cause for concern. If this