ES
6
64
Montaje Soporte Campana
• Apoyar el Soporte de la Campana 3 en la pared haciendo
coincidir los agujeros del soporte con los de la pared.
• Sujetar el soporte a la pared usando los cuatro tornillos
12a
(5
x70) incluídos en la dotación.
• Antes de apretar definitivamente los tornillos, nivelar el
soporte y apretar definitivamente los tornillos.
3
12a
Conexiones salida del aire Versión Aspirante
Para instalarla en Versión Aspirante conectar la Campana a la
tubería de salida con un tubo rígido ó flexible de ø 150 ó 120
mm, cuya elección se deja al instalador. El tubo puede salir sea
por la parte superior que posterior de la campana.
SALIDA POSTERIOR
• Se recuerda que para realizar el agujero de evacuación es
necesario seguir el esquema incluído en el párrafo que indica
como agujerear la pared.
• Para conectar el tubo de ø120 mm, colocar la Arandela de
reducción
9
en la salida del Cuerpo de la Campana.
• Sujetar el tubo con unas fajillas. El material necesario no está
incluído en la dotación.
• Quitar los eventuales Filtros Antiolor al Carbón Activado.
SALIDA SUPERIOR
• Para conectarla a un tubo de ø 150 mm, conectar la Campana a
la tubería de salida con un tubo rígido ó flexible.
• Para conectarla a un tubo de ø120 mm, colocar la Arandela de
Reducción
9
en la Salida del Cuerpo de la Campana.
• Enroscar la reducción de la salida del aire
8c
en el orificio de
salida del soporte de la campana usando los tornillos incluídos
en la dotación.
• Conectar la Campana a la tubería de salida con un tubo rígido
ó flexible
• Sujetar el tubo con las fajillas adecuadas. El material necesario
no está incluído en la dotación.
• Quitar los eventuales Filtros Antiolor al Carbón Activado..
ø 150
ø 120
9
8c
Содержание CYLINDRA 2 EV8 2EL XH890
Страница 81: ......
Страница 82: ......
Страница 83: ......
Страница 84: ...991 0346 779_ver3 190409 D00000162_02...