FABER S.p.A. AirHub Portable 113.0666.175, Руководство пользователя, Страница: 17 / 20

Remote control-purifier pairing
The remote control and purifier are
paired from the first power on. To replace
the purifier or the remote control, it is ne-
cessary to proceed with the pairing fol-
lowing 2 steps:
1. press button C on the purifier for 2
seconds and the 4 digits light up;
2. within 20 seconds it is necessary to
press the A4 button on the remote
control for 2 seconds. The A2 icon
and the 4 digits light up. An acous-
tic signal will confirm that the pair-
ing was successful.
Warnings
• The remote control is powered by two
1.5V AAA batteries (not supplied).
• Do not store the remote control near
heat sources.
• Do not dispose of the batteries in
the environment. Place them in the
appropriate containers.
• Risk of explosion or danger if battery is
replaced with an incorrect type.
• Keep the battery away from extreme,
high or low temperatures.
• Do not keep the battery in areas with
low air pressure.
• Exposing the battery to high temperat-
ures and/or low pressure can cause
explosion or leakage of flammable li-
quids or gases.
5. CLEANING AND
MAINTENANCE
• Do not use abrasive products or ma-
terials.
• Do not use the appliance without fil-
ters or if they are dirty or worn.
• Do not immerse the body of the device
in water or other liquids.
• Clean the device using a damp cloth
and neutral liquid detergent.
• Avoid products containing alcohol or
silicone.
• Clean the grilles with a brush.
• Replace the filter if damaged or worn.
• The filter is neither washable nor re-
generable and must be replaced
every 6 months of operation or every 4
months in case of very intense use.
• Replace the filter with the code ac-
cessory:
17