Installation Instructions
VI-COWL
Product Number: VC2900
2010 - 2018 DODGE 2500
Copyright 2009 Fab Fours, Inc
. Page 12 of 19
VC2900_Installation_Manual_REV_A
Fig 9
f.
Press install the brass bushing into the upper hole in the Upper arm as
shown in
Fig 9
.
g.
Insert the 3/8”-16 bolt with washer and thrust washer into the brass
bushing as shown in
Fig 9
forming the upper arm sub assembly.
h.
Insert the upper arm sub assembly into the front bracket hole with washer
and 3/8"-16 Nylock nut.
i.
Holding the upper arm and bolt stack tight to the lower bracket, tighten the
Nylock nut being carful that the trust washer doesn’t pop out from the
brass bushing.
VI.
Hood Installment
a.
With a friend, lift the hood onto the upper arm of the hood bracket and
install the four factory nuts hand tight.
b.
Align the upper arm with the missing paint marks made under the hood
from the factory brackets. This will get you close as the Fab Four brackets
have identical profile.
c.
Lower the hood slowly and check for uniform hood gap.
d.
Adjust as needed.
