F5 VIPRION 2400, Руководство по платформе

Страница: 55 / 72

AC power redundancy provisioning
The platform supports up to two AC power supplies. The power supplies are auto-ranging 100-127VAC to
200-240VAC input. Each slot is provisioned to draw up to 300W; therefore, one power supply with low-line
input can support two blades with no redundancy, or the same supply with high-line input can support up
to three blades. The following table shows some of the possible blade and power supply redundancy
configurations.
Table 1: AC power provisioning recommendations
1 + 1 redundancy No redundancy
Supplies
(high-line) Supplies (low-line) Supplies
(high-line) Supplies (low-line) Blade quantity
2 (2800W available) 2 (2400W available) 1 (1400W available) 1 (1200W available) 1 (450W)
2 (2800W available) 2 (2400W available) 1 (1400W available) 1 (1200W available) 2 (700W)
2 (2800W available) 2 (2400W available) 1 (1400W available) 1 (2400W available) 3 (950W)
2 (2800W available) 2 (2400W available) 1 (4000W available) 1 (2400W available) 4 (1200W)
AC platform power consumption (low-line input)
The actual amount of power draw from the AC source depends on the type and number of blades, as well
as the power supply AC source voltage and redundancy configuration. The following table shows possible
configurations for low-line voltage, and the typical and maximum power draw.
Table 2: AC mains total system power draw (low-line input)
Number of power
supplies installed Maximum system
power draw Typical system power
draw Blade quantity
1 365W 290W 1
1 625W 470W 2
1 885W 655W 3
1 1145W 830W 4
2 390W 320W 1
2 640W 490W 2
2 895W 670W 3
2 1150W 845W 4
55
Platform Guide: VIPRION 2400