F5 VIPRION 2400 Скачать руководство пользователя страница 15

Страница: 15 / 86

Status

Action

Indicates that either the fan tray controller is powering on, or one or more fans are not
spinning within the specified RPM range.

Yellow solid

Indicates that the fan tray controller is fully functional, and all fans are spinning within
the specified RPM range.

Green solid

AC power supply indicator LEDs

The AC power supply LEDs indicate the status of the power supply and power input.

Status

LED

Indicates that AC input voltage is operational (on) or non-functioning (off).

Indicates that DC output voltage is operational (on) or non-functioning (off).

Indicates these conditions:

FAIL

•

No AC input

•

Fan failure

•

Power supply errors or failures (for example, high temperature, high voltage)

Indicates these conditions:

SYS

•

Yellow status when the fan tray is powered, and one of these conditions are true:

•

AC failure

•

DC failure

•

Any other power supply faults, such as fan failure (indicated by the FAIL LED)

•

Green status when the fan tray is powered, and the power supply is fully functional
(AC and DC are OK; no other faults indicated by the FAIL LED).

DC power supply indicator LEDs

The DC power supply LEDs indicate the status of the power supply and power input.

Status

LED

Indicates that DC input voltage is operational (on) or non-functioning (off).

Indicates that DC output voltage is operational (on) or non-functioning (off).

OUT

Indicates these conditions:

FAIL

•

No DC input

•

Fan failure

•

Power supply errors or failures (for example, high temperature, high voltage)

Indicates these conditions:

SYS

•

Yellow status when the fan tray is powered, and one of these conditions are true:

•

DC failure

•

Any other power supply faults, such as fan failure (indicated by the FAIL LED)

•

Green status when the fan tray is powered, and the power supply is fully functional
(DC is OK; no other faults indicated by the FAIL LED).

Platform Guide: VIPRION

2400

Содержание VIPRION 2400























































































Результаты поиска

Содержание VIPRION 2400

Отзывы:

Похожие инструкции для VIPRION 2400

Бренды по названию

Популярные бренды

F5 VIPRION 2400, Руководство пользователя

Результаты поиска

Содержание VIPRION 2400

Отзывы:

Похожие инструкции для VIPRION 2400

Бренды по названию

Популярные бренды