manualshive.com logo in svg

F5 i2000 Series, Руководство по платформе, Страница: 9 / 62

Поделиться
Скачать
F5 i2000 Series Скачать руководство пользователя страница 9

About using the LCD

To manage the platform using the LCD menu options, tap the touchscreen LCD to put it into menu mode.
The LCD is operational even when the Host is powered off, provided that Always-On Management and
the LCD are fully booted.

Important: It might take a few minutes for the LCD to become operational when the system is started
from a powered off state.

Note: When using the LCD to configure the unit, be sure to use the Commit option to save all settings.

Reboot the unit

You can use the touchscreen LCD to perform a soft reboot of the unit.

1.

Touch the screen to activate the LCD menus.

2.

Tap 

System

.

The System screen displays.

3.

On the System screen, tap 

Soft Reboot

.

4.

Tap 

Confirm

 to reboot the unit.

Reset the unit

You can use the touchscreen LCD to perform a hard reset of the unit.

1.

Touch the screen to activate the LCD menus.

Platform Guide: i2000/i4000 Series

9

Содержание i2000 Series































































Отзывы:

Нет отзывов