F5 i15000 Series, Настройка

Страница: 23 / 28

Guidelines for NEBS platforms
This information applies to the Network Equipment-Building System (NEBS) version of the this platform:
• This equipment meets NEBS requirements per GR-63-CORE.
• This equipment is suitable for installation in these locations:
• Network Telecommunication Facilities
• Locations where the National Electrical Code (NEC) applies
Important: The intra-building interfaces of this platform, including Ethernet, are suitable for connection
to intra-building or unexposed wiring or cabling only with shielded and grounded cables at both ends. The
intra-building ports of the equipment must not be connected metallically to interfaces that connect to the
outside plant (OSP) or its wiring.
Note: You should coat bare conductors with an appropriate antioxidant compound before you make crimp
connections. You should bring all unplated connectors, braided strap, and bus bars to a bright finish and
then coat them with an antioxidant before you connect them.
Platform airflow diagram
When you install the platform into a rack, it is important to understand the unit's airflow direction so that
you can ensure proper cooling.
The platform employs a negative pressure fan system, which draws cold air in from the front of the chassis.
23
Setting Up the i15000 Series Platform