F5 BIG-IP 10000 Series, Руководство по платформе, Страница: 9 / 68

The 10000 Series Platform
About 10000 Series models
The BIG-IP
®
10000 Series platform is a powerful system that is capable of managing traffic for any size of
enterprise. This platform series includes models that support either hard disk drives (HDDs) or solid-state
drives (SSDs).
F5 offers three performance levels of SSL offload in the 10000 Series: the 10000s, 10200v, and 10200v-SSL.
The 10200v-SSL platform features high-performance SSL hardware that frees servers from the task of
encrypting and decrypting data.
The 10000 Series platform is available with a FIPS compliant hardware security module (HSM) as a
factory-installed option (10200v-FIPS and 10350v-FIPS). The 10150 Series platform is available in Network
Equipment-Building System (NEBS) compliant versions (10150s-NEBS and 10350v-NEBS).
Note: FIPS is not supported in vCMP guests.
for more information, see the data sheet at
www.f5.com/pdf/products/big-ip-platforms-datasheet.pdf
.
About the platform
Before you install this platform, review information about the controls and ports located on both the front
and back of the platform.
On the front of the platform, you can reset the unit using the LCD control buttons and view the indicator
LEDs for disk drive access. You can also use the front-panel LEDs to assess the condition of the platform.
On the back, you can power off the unit.
Figure 1: Front view of the 10000 platform
1. Management 10/100/1000 port
2. USB ports
3.
Console serial port
4. Serial (hard-wired) failover port
5. 1/10G SFP+ ports
6. 40GbE QSFP+ fiber ports