F5 BIG-IP 10000 Series Скачать руководство пользователя страница 59

Страница: 59 / 68

Repackaging Guidelines

About repackaging the platform

If it becomes necessary to transport the platform to another location or return it to F5

Networks, these

guidelines will help ensure that you repackage the platform properly.

If you are running BIG-IP

software version 11.6 or later, you can perform a disk erase operation to erase

all sensitive data from solid-state drives (SSDs) and hard disk drives (HDDs) before you return a platform
to F5. For more information, see

F5 Platforms: Essentials

support.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/f5-plat-hw-essentials.html

Important: Before returning any equipment, contact F5 to obtain a Service Order (SO) or Return Material
Authorization (RMA) case number.

Important: You must use shipping materials and packaging provided by F5 when repackaging the platform.

Note: Be sure to keep a record of the tracking number and ship date. These will be needed to track lost
shipments.

Note: Do not include any cables, removable transceiver modules, GBICs, or other peripheral items if you
are returning the platform to F5.

Repackaging the platform

The 10000 Series platform must be shipped in F5

-provided packaging.

Caution: To ensure your safety and to prevent damage to the platform, we highly recommend that you
have at least two people remove the platform from the rack and repackage it into the shipping box.

Halt the platform using the LCD panel.

Disconnect the AC power cord or DC power supply terminal from the power supplies.

Disconnect the network cables and other cables from the platform, and then remove any optical modules.

Remove the platform from the rack.

Wrap the platform in the plastic wrapping, if available.

Lift the foam flaps and place the platform into the shipping box, and then place the accessory boxes in
the foam inserts.

Содержание BIG-IP 10000 Series





































































Результаты поиска

Содержание BIG-IP 10000 Series

Отзывы:

Похожие инструкции для BIG-IP 10000 Series

Бренды по названию

Популярные бренды

F5 BIG-IP 10000 Series, Руководство по платформе

Результаты поиска

Содержание BIG-IP 10000 Series

Отзывы:

Похожие инструкции для BIG-IP 10000 Series

Бренды по названию

Популярные бренды