F5 6900 страница 90 Скачать руководство пользователя

Страница: 90 / 126

Chapter 10

10 - 4

Identifying the faulty hard drive

To identify the faulty hard drive

1. Log on to the command line of the system using the root account.

2. Type the following command to see the status of the hard drives:

tmsh show sys raid array

A disk summary similar to the following displays:

3. Make note of the serial number for the faulty hard drive.

Note:

You can also locate the last seven digits of the serial number

on the front of the drive, and the serial number is printed in its
entirety on the labels on the top of the drive.

4. To ensure that you remove the correct hard drive, you can make the

LED blink for that bay (bay 1 in the above example) by typing the
following command:

tmsh modify sys raid bay 1 flash-led

Note:

The LED continues to blink until the new hard drive begins

the replication process.

5. Before you remove the hard drive from the system, type the

following command to remove the faulty hard drive (HD2 in the
above example) from the array:

tmsh modify sys raid array MD1 remove HD2

Next, you can remove the faulty hard drive and replace it with the new one
you received from F5 Networks.

Replacing the hard drive

To replace the hard drive

1. Remove the front bezel from the unit.

2. Verify that the serial number for the hard drive located in the

blinking bay matches that of drive that you are replacing.

Note:

The last seven digits of the serial number are printed on the

front of the hard drive, behind the metal grill.

Sys::Raid::Array: MD1

---------------------

Size (MB) 305245

Sys::Raid::ArrayMembers

Bay ID Serial Number Name Array Member Array Status

---------------------------------------------------------

1 WD-WCAT18687707 HD2 yes failed

2 WD-WCAT18687387 HD1 yes ok

Содержание 6900































































































































Результаты поиска

Содержание 6900

Отзывы:

Похожие инструкции для 6900

Бренды по названию

Популярные бренды

F5 6900, Руководство по платформе

Результаты поиска

Содержание 6900

Отзывы:

Похожие инструкции для 6900

Бренды по названию

Популярные бренды