F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 -, Руководство администратора

Страница: 276 / 349

276
3.
Click Add new exception at the Exceptions table. A New Quarantine
Cleanup Exception dialog opens.
4.
Select the Quarantine category for which you want to specify the
exception. Specify a
Retention period and a Cleanup interval for the
selected category.
5.
To turn on the exception, make sure that the Active check box is
selected. Click Ok .
6.
Click Apply to apply the new changes.
7.7 Moving the Quarantine Storage
When you want to change the Quarantine storage location either using
the F-Secure Policy Manager Console or F-Secure Anti-Virus for
Microsoft Exchange Web Console, note that the product does not create
the new directory automatically. Before you change the Quarantine
storage directory, make sure that the directory exists and it has proper
security permissions.
You can use the
xcopy
command to create and change the Quarantine
storage directory by copying the existing directory with the current
ownership and ACL information. In the following example, the Quarantine
storage is moved from
C:\Program Files\F-Secure\Quarantine
Manager\quarantine to D:\Quarantine :
1. Stop F-Secure Quarantine Manager service to prevent any
quarantine operations while you move the location of the Quarantine
storage. Run the following command from the command prompt:
net stop "F-Secure Quarantine Manager"
2.
Run the following command from the command prompt to copy the
current content to the new location:
xcopy "C:\Program Files\F-Secure\Quarantine
Manager\quarantine" D:\Quarantine\ /O /X /E
Note the use of backslashes in the source and destination directory
paths.