10
Pas 4 & 5 LED both flashin
Other error
Pas 5 LED flashing
Controller Communication Error
If the 5-core cable connected to the
controller and the controller fails, and
the meter cannot be turned on and the
LED is not display
The main power cord is not connected / the controller is
out of phase. The meter can be turned on, but it stops
working after 3S. There may be a reason: any one of the
green and yellow signal lines connected to the controller
and the controller is open.
D15-MSUP display is a 5-pin lead-out cable that is powered by a 24V/36V/48V battery voltage.
1. The power supply is positive (red line)
2. ground (black line)
3. communication T (yellow line)
4. communication R (Green line)
5. Weak electric lock (blue line).
Installation
Fix the display and bolt on the handlebar, adjust the proper angle of view, and screw on the bolt in an
easy-to-manipulate position. Tighten the screws to complete the installation.
5.2 ANANDA LCD Display D13
blue
rot
red
green
rot
rot
yellow
rot
black
Plus
Battery
level
Light, error, walking
Pas
Mileage, Trip, AVG
and Max speed
Speed, KMH and
MPH switch
Minus
On/Off
Increase
assistance
Reduce
assistance
