EN
109
D15-MSUP display is a 5-pin lead-out cable that is powered by a 24V/36V/48V battery voltage.
1. The power supply is positive (red line)
2. ground (black line)
3. communication T (yellow line)
4. communication R (Green line)
5. Weak electric lock (blue line).
Installation
Fix the display and bolt on the handlebar, adjust the proper angle of view, and screw on the bolt in an
easy-to-manipulate position. Tighten the screws to complete the installation
4.2 ANANDA LCD Display D13
Product Functions
D13/U LCD display integrates a 2.4” multi
-function screen, which supports 24V / 36V / 48V battery. It also
integrates the headlight switch function. The main functions of D13/ U are:
•
Total Mileage
•
Trip Mileage
•
Current Speed
•
Light Status
•
Assistance Level
•
Battery Capacity
•
Error Code
•
Mile/ Kilo Meter
•
Wheel Size
•
Riding Time
•
Walking Assistant
Button Definition
D13-Dispaly is equipped with 3 buttons: plus key, open key, minus key.
Operation
Switch on/off
Press and hold the Switch on/off key for 1 second, turn on the display, and start the ebike system. In the
working state, press and hold the Switch on/off key for 2 seconds to turn off the system. In the off state, the
display no longer uses the battery's
power supply, and the display's leakage current is less than 2μA.
Turning on/off the lights and backlights
In the power-on state, long press the button for 2 seconds, the lamp will turn on, and the instrument
backlight will be turned off; press and hold the button for 2 seconds, the lamp will be off and the instrument
backlight will be turned on.
blue
rot
red
rot
green
rot
yellow
rot
black
Battery
level
Light, error, walking
Increase assistance
level
Level of assistance
Reduce assistance
level
Current speed in km
Distance, average and
maximum speed
On/Off
Plus
Minus
Содержание E-Moon Trek 28 Series
Страница 4: ......