Sail Tuning for the 2000 Ezzy Freestyle
EZZY FREESTYLE 2000
SAIL TUNING
Rigging:
IMPORTANT DOWNHAUL AND OUTHAUL INFORMATION, PLEASE READ:
1) Slide the mast through the luff sleeve.
2) Thread the downhaul line through the base cleat
. Do not
tension yet.
It is easier to attach your boom onto the mast with no
downhaul tension.
PLEASE NOTE
: It is okay to downhaul before outhauling. This will
not damage the sail, however it is easier to downhaul after the sail
has been fully outhauled.
3) Attach the front of the boom to the mast and outhaul the sail
to
the boom length that is printed on the sail.
The suggested
boom length is measured from the clew to the front of the mast at the
center of the boom cutout.
4) Downhaul the sail until the leech goes loose between
battens #1 and #2.
Use the printed marks as a reference. For light
wind, the looseness should extend to mark #1. For medium wind the
looseness should extend to mark #2 and for strong wind, the
looseness should extend to mark #3. See diagram below:
Page 1
