background image

SLT-510 manual.indd   2-3

10/08/12   1:23 PM

Installation Instructions

Tilting Wall Mount

CAUTION:

 DO NOT EXCEED THE 

MAXIMUM STATED WEIGHT CAPACITY.  
SERIOUS INJURY OR PROPERTY 
DAMAGE MAY OCCUR!

200x200 / 300x300
400x200 / 400x400

55”

MAX

70kg

SLT-510

Use the tilt adjusting knobs to adjust your TV to the desired angle.

Maintenance

 

Check that the bracket is secure and safe to use at regular intervals 
(at least every three months).

 

Please contact your local distributor if you have any questions.

4. Adjustment

Содержание SLT-510

Страница 1: ...IOUS INJURY OR PROPERTY DAMAGE MAY OCCUR 200x200 300x300 400x200 400x400 55 MAX 70kg SLT 510 Use the tilt adjusting knobs to adjust your TV to the desired angle Maintenance Check that the bracket is secure and safe to use at regular intervals at least every three months Please contact your local distributor if you have any questions 4 Adjustment ...

Страница 2: ...at the mounting screws are anchored into the centre of the studs Use of a stud finder is highly recommended Always use an assistant or mechanical lifting equipment to safely lift and position equipment Tighten screws firmly but do not over tighten Over tightening can cause damage greatly reducing their holding power This product is intended for indoor use only Using this product outdoors could lea...

Страница 3: ... components When installing wall mounts on cinder block verify the actual concrete thickness is at least 35mm for using the concrete anchors Do not drill into mortar joints Be sure to mount in a solid part of the block generally 25mm minimum from the side of the block It is suggested to use the electric drill on a slow setting to drill the hole instead of a hammer drill to avoid breaking out the b...

Страница 4: ... 2 Attach Adapter Brackets 3 Hang TV on the Wall Plate Position the adapter brackets as close as possible to the middle of the screen Ensure the Tilt Adjusting Knobs are located on the outside of the rails Screw the adapter brackets onto the TV Tighten all screws but do not over tighten SLT 510 manual indd 6 7 SLT 510 manual indd 6 7 10 08 12 1 23 PM 10 08 12 1 23 PM M A M B M F M C M D M C M D M ...

Отзывы: