15
Manual Calibration
Please follow the wizard on the page and complete the calibration manually.
1.
Check out your lock and confirm it is locked or unlocked when the door lock knob turned clockwise.
2. Turn the key knob and record the number of turns does it need to unlock (lock tougue retracted).
3� Install the Door Sensor
Please install the door sensor according to the EZVIZ App.
1. Please stand inside the door and attach the door sensor to the door frame and close to the lock. Please note
that the center of the door sensor should be parallel to EZVIZ logo on the cover, as shown in the figure below.
The distance between the door sensor and the lock can't exceed 5cm. The bottoms of the door sensor and the
lock should be aligned as much as possible.
Door Sensor
Door Frame
<5cm
<5cm
Door Frame
Door Sensor
Front View
Top View
