13
Add Lock to EZVIZ
The app interface may be different due to version update, and the interface of the app you installed on your
phone shall prevail.
1� Add Lock to EZVIZ
1. Log in to your account through EZVIZ app
, tap the device adding icon and then the QR code scanning
interface will be displayed.
2. Scan the QR code
on the back of the front cover
.
Scan QR Code
3. Press and hold the Matching Key for 3s, the lock will enter adding mode when you hear 'Di'. When the indicator
ring is fast flashing blue, the bluetooth is enabled and the lock enters adding mode which will last 3 minutes.
• Please confirm the lock is in the initialization state.
If not,
remove the batteries of the lock, press and hold
the Matching Key and install the batteries back. Press and hold the Matching Key for 5s until the LED
indicator ring is solid orange, all parameters will be restored to factory settings.
• During adding configuration EZVIZ may ask for the bluetooth permission includes the scanning, adding
and using bluetooth devices. Please click Yes to grant this permission.
4. Put your phone close to the lock. Enter the management code when needed. The management code is on the
back of the front cover.
