EZee Life 170 Tilt & Recline, Быстрый старт, Страница: 6 / 10

6
When adjusted properly, the distance between
the strut release lever (5), and the cable anchor
(6), should be about 1”.
If the chair angle cannot be changed when the
tilt lever (4) is pressed the cause is usually out of
adjustment or stretched cables. If the chair will not
lock at any angle the cables are likely adjusted too
tight.
Footplate Adjustment – Proper footplate adjustment is required
for comfort and reduction of pressure points. If the footplates are
positioned too high pressure is increased on the buttock area; if they are
too low, pressure is increased on the backs of the legs just above the
knees and the feet are left dangling.
See item 8 on page 4 for adjustment procedure.
Operating Instructions
Arms – The arms of the commode can be flipped
up and back to aid in transfers or access by
caregivers for bathing. The arms will stay raised
when raised all the way.
When doing a side transfer to or from the
commode only the arm on the side the transfer is being done on should
be raised.
Seat Belt – The seat belt supplied with the commode is known as a side
release seat belt. To undo the buckle simply depress both release tabs at
once and pull the two sides apart.
To do up the seat belt slide the prongs into the
receiver until they click into position.
Do not leave clients unattended in the commode.