EZee Life 170 Tilt & Recline, Быстрый старт, Страница: 4 / 10

4
6. The adjustment is made by simply depressing the anti-
tipper push pin (1), sliding the inner anti-tipper tube
(2) to the desired length, aligning the push pin with the
closest adjustment hole (3) and allowing it to pop
through.
(The anti-tippers should be as close to the floor as possible
without catching on doorway thresholds, changes in floor
levels or other obstacles.)
7. To attach the footrest (1) to the commode lower the
footrest pivot plug (2) into the top of the front seat
frame (3) with the foot plate (4) off to the side of the
commode. Then swing the footrest to the forward
position where it will lock in place.
8. The foot plate height can be adjusted by loosening the
footrest clamp (1), sliding the foot plate extension tube
(2) up or down inside the footrest hanger tube (3) and
re-tightening the clamp.
DO NOT extend the footplates past the MAX line (4) stamped into the foot
plate extension tubes. The MAX line should not be visible.
9. From the back of the commode slide the commode
pail into the pail support channels (1) located on the
bottom of the seat pan (2).
10. Install the adjustable head rest (1) by inserting and
vertical support tube (2) into the headrest bracket (3)
mounted on the commode push bar and then insert
the horizontal support tube (4) through the end
bracket (5) of the vertical tube (2).