EZee Life 170 Tilt & Recline, Быстрый старт, Страница: 3 / 10

3
Assembly Instructions
1. Slide seat belt loops (1) onto each side of
backrest (2) posts.
2. Insert two back support posts (1) into seat frame (2)
and tighten two hand wheels (3).
3. Insert four caster stems into holes in the four corners of the
bottom of the frame.
4. Set the seat height by aligning the caster stem holes
(1) with the desired adjustment holes (2) in the
frame and inserting the locking pin (3) to secure the
caster.
5. Insert the anti-tippers into the two anti-tipper receiver
tubes located at the rear of the frame above the casters.
Ensure the push pins have popped through the set
receiver holes.