Single Hole
Application
3-Hole
Application
· Every once in a while, please rinse the faucet with lukewarm soapwater, and wipe it clean with a soft duster cloth.
Please avoid any abrasive cleaners, steel wools, or corrosive chemicals.
1.Install square Gasket
②
onto Faucet Body
①
.
Slide single hole faucet through the sink mounting hole.
7
1
6
5
4
3
2
6
5
4
3
2
8
9
8
9
Note: Escutcheon is included for 3-Hole applications.
⑦
2.Place Stainless Steel Washer
④
and Rubber
Washer
③
onto Mounting Studs
⑥
under the
sink, and tighten the Mounting Nuts
⑤
securely
as shown.
3.Connect and screw on the Supply Hoses
⑧
to Valves
⑨
.
4.Turn on faucet to check for leaks.
· To insure proper installation, please read the following instructions carefully.
· Please make sure that the water supply has been shut off at the stop valve.
· EZANDA reserves the right to update product without notice.
BEFORE INSTALLATION
If you have any question or need help,
please visit website
http://www.ezanda.com
