INSTRUCTION MANUAL
SWD® Starter Kit
Page
15
on
24
V-EN_2021_SWD® Starter Kit
8
NC
9
NC
10
NC
11
NC
12
NC
Ethernet connector
The Ethernet connector is a standard RJ45 for 10/100 Mbps transmission.
It is used to exchange non-safe data between the SE2L and the iMX6 PC.
Pin #
Designation
1
TD+
2
TD-
3
RD+
4
NC
5
NC
6
RD-
7
NC
8
NC
5.5.
Battery connectors
The Power connector and Charger connector of the Mobility Module battery are used in the SWD Starter Kit.
Please refer to the Mobility Module User Manual for details on the complete connections of the product.
Power connector
The Power connector is a Neutrik Speakon 4-pin.
It is used to power the kit and to turn ON and OFF the battery.
Pin #
Designation
1+
24 VDC
2+
GND
1-
RD+
2-
ON signal
Charger connector
The Charger connector is a Neutrik XLR 5-pin.
It is used to connect the charger to the battery.
Pin #
Designation
1
2
NC
3
NC
4
NC
5
GND
1
5
