or email [email protected]
REACH IN CLOSET INSTRUCTIONS
Included Plastic Parts
Tube Receivers – 5 Left & 5 Right
5 Center Supports
4 End Brackets – optional use
left shown
For EZ Installation,
Read Instructions
&
WATCH installation videos BEFORE
beginning installation.
Installation videos:
This Photo shows
EZS-K-WRI White Reach in Closet Kit which
includes
1 Closet Shelf & Rod unit (
40” - 73”),
1 Closet Shelf & Rod unit (
28”- 48”),
3 Shelf Units
(each 28” - 48”)
& 3 End Brackets (1-EZS-EB-SCRW, and
2-EZS-EB-SW).
This can also be configured with the shelves on the left side.
Other layouts are possible depending upon closet measurements & your requirements.
Please call or email for design or installation assistance.
1)
Measure each wall of closet before beginning and design your closet space(s)
.
2)
Read Instructions & Watch 2 Minute Videos
The above picture has the following configuration:
Top Shelf & Rod - 1 Shelf and Rod Unit (40 – 73”) – EZS-SCRW72
Bottom Shelf & Rod & Shelf – 1 Shelf & Rod Unit (28 – 48” – EZS-SCRW48)
joined
with
1 Shelf Unit (28 – 48” EZS-SW48)
and
1
included
End Bracket EZS-SW
2 Additional Shelves (28-48” EZS-SW48)_ and 2 included Shelf End Brackets (EZS-EB-SW)
Shelf units are mounted to a side wall and End Brackets are used for mounting the other side to the Back Wall.
1 Shelf & Rod Unit Joined with 1
Shelf Unit with included
Shelf & Rod End Bracket
EZ-EB-SCRW
Shelf Unit Mounted to Side Wall &
Back Wall
with included 1 Shelf End Bracket
EZS-EB-SW
