43YC
CAR CAM WITH CROTCH STRAP
IMPORTANT INFO
• Meets FMVSS213
• 43YC is for use by a passenger weighing 31 – 106
• You must use EZ-ON hardware tether kit (included) to install this conversion vest if the factory
installed tether anchor weight limit is less than the weight of the passenger or if there is no
tether anchor point available in your vehicle.
• Register this product to be notified for a safety recall
EMERGENCY RELEASE PROCEDURE
EZ-ON PRODUCTS
1-800-323-6598
www.ezonpro.com
WARNING
Death or serious injury can occur If manufacturer’s instructions are not followed correctly.
All EZ-ON products are dynamically tested to meet NHTSA standards. Please follow washing
instructions on product tag. Replace product if it is damaged, frayed, or has been in a crash.
Recommended replacement after six years.
EZ-ON Products are not liable for injury if these recommendations are not followed.
WARRANTY
EZ-ON Products stands behind the products we make. Warranty covers any defects in material or workmanships under
normal use during the warranty period. We will repair or replace product defects for 1 year from manufacturer date.
When evacuating a passenger in an 43YC belt,
one cut of the lap belt will allow the passenger to evacuate the vehicle.