EZ DUPE Flex PRO SD, Руководство пользователя

Страница: 11 / 18

6.4 Media Information
This function displays the information of selected device media, such as total capacity, file
format and the size of data content.
6.5 System Information
This function displays general information of the duplicator system, including controller
model, system memory size, and firmware version.
6.6 System Update
This function allows user to update the firmware of duplicator when necessary. Please obtain
the proper firmware file from manufacturer, and save the unzipped file under home folder on
the SD or Micro SD card
(DO NOT save the file under sub folder, format the file
system format as FAT32) . Insert the SD or Micro SD cardcontaining the firmware into
the source port of duplicator and press ENT. It will update the system, reboot the
duplicator after update, active and operate the system under the new firmware.
ENT
Use
▲▼to select device
ENT
[#0] 29.8G
FAT32 20.1G
6.
Utility
[Utility]
4. Media Information
Port # Total Capacity
File Format Data Size
ENT
Display system info
ENT
D0123SD 128MB
V1.05.18
6. Utility
[Utility]
5. System Information
Model Memory
Firmware
ENT
Searching source device
ENT
Update BIOS
Identify disc…
6.
Utility
[Utility]
6. System Update
Update BIOS
Complete! Reboot!
Update complete!
System will reboot
10