EZ-ACCESS Pathway Stair System, Инструкция по сборке, Страница: 8 / 15

- 8 -
3.2. Insert the top vertical posts into each top corner pocket with the stair hanger oriented away from
the riser. Tighten one
3/8”
-16 set screw in each top corner pocket (FIG.5).
3.3. Insert legs in bottom corner pockets so that the square base foot is oriented under the riser as
shown. Tighten one
3/8”
-16 set screw on each bottom corner pocket (FIG. 6).
FIG. 5
FIG. 6
3.4. Hang the stair assembly on the platform in the desired location. Adjust the vertical position of the
riser on the legs and top posts by loosening and retightening the 3/8”
-16 set screws in the riser
corner pockets until the distance from bottom tread to ground is approximately the same distance
from top tread to the platform walking surface and the stair treads are level. After the riser has
been positioned and leveled, tighten all set screws in the corner pockets for stair top posts and
legs securely (FIG. 7).