EZ-ACCESS Pathway Stair System, Инструкция по сборке, Страница: 10 / 15

- 10 -
FIG. 9
3.7. Locate the eight closure elbows and disassemble by removing the screw and nut, then remove the
center insert (FIG. 10).
3.8. Insert the elbow half with the internal set screw into both ends of one handrail tube. Make sure the
side for the assembly screw is oriented in the same direction and the flat portions of the elbow
halves are parallel on both ends of the handrail tube then tighten the internal set screw securely
using a T-Handle Allen wrench or similar tool. NOTE: The handrail tubes need to be trimmed most of
the time. It is recommended you complete steps 3.10 to 3.12 with one handrail tube before installing
elbow halves with internal set screws in the rest.
FIG. 10