Page | 7
HAULWAY
®
Battery Pack
4.
UNDERSTANDING LED INDICATORS
4.1.
The ON/OFF switch (FIG. 6, item 1) turns the battery power OFF and ON.
4.2.
LEDs (FIG. 6, item 2) indicate the state of the charge
4.2.1.
RED = charging
4.2.2.
GREEN = charged
4.3
To check the internal battery’s state-of-charge, push the Internal Battery Status (FIG 6, item 3) button and
observe the LED displays:
4.3.1
RED = Charging (FIG. 6, item 2) illuminates when the internal battery is charging from a 120 VAC
electrical wall outlet.
i. Indicates a 50% or less charge; immediate recharging required.
ii. Continues to illuminate until battery reaches a 75% charge.
4.3.2
YELLOW = Indicates a 75% or higher charge
iii. The Battery Pack may be used, but should be charged soon.
4.3.3
GREEN = Indicates the internal battery is fully charged.
FIG. 6
5.
TEST HAULWAY FUNCTIONS
5.1.
Turn HAULWAY Lift key to the right to ensure that the lift has power.
Turning key to the right will lower the HAULWAY Lift. As the lift lowers, it will unfold to prepare for
loading of the mobility device.
Refer to your
HAULWAY Installation and User Manual
for lift functionality, if needed.
5.2.
If motor does not have power, check all connections to ensure they are secure.
5.3.
If platform goes in the opposite direction (up when turning to the right), make sure all connections are
connected properly.
If, after following the process above, the HAULWAY Lift does not operate or have power, please go
through the process a second time and look for improperly connected wiring.
If the HAULWAY LIft still fails to function, stop and call your HAULWAY dealer for assistance, or call
1-800-451-1903.