1
B1080PX-3
QUICK GUIDE
1. Hardware Overview
Power Switch:
Toggle between main power on & off.
DC Input:
For the power adapter. (DC 12V / 1.5A)
IR Input:
Connects to PIR Sensor (optional) or IR Cable (optional).
VGA Output:
Connects to devices that support VGA input. (LCD
、
projector)
HDMI Output:
Connects to devices that support HDMI input.
RJ-45 Ethernet Connector:
Connects to router or PC by RJ-45 Cable.
Audio Output:
Connects to sound input. (HDTV with amplified speaker)
Video Output:
Connects to devices that support Video input. (HDTV
、
projector)
RS-232 Connector:
Used for computer control with ASCII command.
“CF READY” LED:
Steady green confirms that the CF card is inserted correctly.
CF Card Socket:
For CF memory card.
“RESET” Button:
To restart the B1080PX-3.
A u g 2 5 , 0 9
3 4 5 3 5 0 5
2
2. Network Setup
Confirm the B1080PX-3 is already connected to the network.
2.1 Setting the Network from the OSD Menu
Step1:
In the main menu, using the “
▼
” button on remote control to select the “
SETUP
” item, and then
press the “ENTER” button. You will be presented with the B1080PX-3 settings screen.
You can also press the “
SETUP
” button on remote control to directly open the settings screen. (If there
is file that is being play, please stop first.)
Step2:
There are five groups of sub-menu in the main menu (“Network Setup”, “FTP Setup”, “Video
Setup”, “Other Setup” and “Scrolling Setup”).
Step3:
In the
Network Setup
item
Network with:
Select your network connection Disable/ RJ45.
IP Assigned by DHCP:
If you have a DHCP-enabled router, please select “On”, and then the
router will automatically assigns an IP address to the B1080PX-3. If you don’t have a
DHCP –enabled router, select “Off” and type the network information in “
Assign IP Address
”.
Assign IP Address:
If the B1080PX-3 is connected to a network without a DHCP server or you
want to use Local FTP Server function, enter the fixed IP address, Mask, Gateway and DNS for
the B1080PX-3.
Step4:
After finish setting, press the
Setup
button to save and quit.
