Document Nr.:
Version:
1.Vers. from date:
1.Version from:
Modified from:
Modified at:
Page Nr.
OSH-Manual-EN
1.3
28.02.2012
A. Schutz
A. Schutz
11.05.2012
18 von
33
7.4. Adjusting the Geometry
At the point “Geometry” you can adjust the geometry settings. You have to set the picture
HD_XGA_Grid.bmp
which is a content of the main folder of
omniSHAPES-Designer
. Set it
as the background picture of the source desktop.
On the picture beside you
can see the background grid
which is seen on the screens
of each omniSHAPE.
To adjust the geometry you first have to choose one omniSHAPE. Click on the symbol
in the main Window.
The omniSHAPE, what you want to adjust has to be chosen.
Not chosen
omniSHAPE ID:1 is chosen
Here you can see the geometry configuration of the
omniSHAPES-Designer
.
Adjusting features
