Eyecon 9420, Инструкция по эксплуатации, Страница: 99 / 146

Eyecon 9420 & 9430 Instruction Manual 99
4.5 Practices common to all modes
Remove broken pills or foreign objects and/or unstack the piled up pills by slightly lifting
the tray about 1/4” and forcefully tapping it back down to vibrate the stacked pills off of
each other. For more severely stacked pills, you can use the Eyecon’s spatula to slide
pills off of each other. The screen will automatically return to the count mode when the
problem is resolved.
If you notice that pills lying on their sides are causing a problem, see
Train or Retrain a
pill image on page 105
.
4.5.6 Best filling practice
Small pills
Use the following procedure whenever you are dispensing small pills from the counting
tray into a vial or stock bottle.
1.
Raise the counting platter to pour the pills into the funnel.
2. Cup your hand around the mouth of the
bottle or vial and place this hand under
the funnel and place the tongue of the
funnel inside the vial or stock bottle. See
photo at right.
3. Push your hand up to raise the funnel
gate and empty the pills into the vial or
stock bottle.
4. Validate all pills were dispensed into
bottle to avoid cross contamination.
5. Ensure funnel gate is returned to the
closed position.
Large pills
Large pills can sometimes bridge in the funnel if dispensed using the small pill method
above. Follow these steps to avoid this situation.
1.
Cup your hand around the mouth of the bottle or vial and place this hand under
the funnel and place the tongue of the funnel inside the vial or stock bottle.
2. Push your hand up to raise the funnel gate.
If you empty a bottle and need to use additional bottles to complete your count,
after emptying the first bottle, press the Add-to-Total button to record the
number of pills from the first bottle. Then after transferring those pills into the
patient vial, scan the 2D barcode on the next bottle to capture the lot#, SN, and
expiration values for this new bottle. Repeat as needed for each additional
bottle to be dispensed. Your Eyecon will save multiple sets of these values.