background image

8

TROUBLESHOOTING

Problem

EyeVac Pro will not turn on/no 
power

Does not pick up debris

Suction not strong

Canister Full
 Indicator light is On

Sensor does not activate

Debris at Inlet before unit is 
powered on

Status Indicator Light
blinking

1. Not firmly plugged in
2. Control Dial is in Off position
3. Pre-Motor Filter is not in the 
correct position
4. Broken switch

1. Dirt inlet is blocked
2. Canister is full
3. Debris may be too large
for inlet

1. Filters may be dirty 

1. Canister is full

1. EyeVac Pro is not in Auto Mode

1. EyeVac Pro sensors have

been shut off for 30 seconds 
which caused power to the 
motor to be shut off

1. Turn Control Dial to the Off position
2. Clean path of dirt inlet
3. Empty Canister
4. Clear large debris

1. Turn Control Dial to the Off position
2. Clean Pre-Motor, Exhaust filters or Vent Filter

when needed

1. Turn Control Dial to the Auto position

1. Turn Control Dial to the Manual position
2. Activate unit manually

1. Turn Control Dial to the Off position
2. Empty the Canister
3. Clean all Filters

1. Turn Control Dial to the Off position

1. Plug in firmly
2. Turn Control Dial to Manual or Auto position
3. Ensure that Pre-Motor Filter is locked and flush 

with Canister Lid

4. Remove Canister to check switch inside cavity

above where Pre-Motor Filter is positioned. If
switch is broken or missing, fill out a service
Request Form” at “EyeVac.com/connect

Possible Cause

Possible Solution

CORRECT DISPOSAL OF THIS PRODUCT

This marking indicates that this product should not be disposed with other household wastes. To prevent 
possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly 
to promote the sustainable reuse of material resources. To return your used device, please use the return 
and collection systems or contact the retailer where the product was purchased. They can take this 
product for environmentally safe recycling. This appliance is a dry pick-up, Canister type vacuum cleaner for 
household and indoor use. Also, it is a general-purpose vacuum cleaner, which can be used for hard floor 
cleaning.

Содержание EVPRO











Отзывы: