Eye Vac EVPRO, Руководство пользователя

Страница: 7 / 10

7
CLEANING THE EXHAUST FILTER
CLEANING THE VENT FILTER
CLEANING THE CANISTER
STORAGE
1. The Exhaust Filter slides up and out of its housing on the side of the unit.
2. Gently pull the Filter out of the Filter Holder.
3. Tap Filter gently against trash container to free and eliminate excess dirt and debris.
4. To clean the Filter, wash in mild soap and water; rinse and
dry thoroughly before assembly
5. Slide the Exhaust Filter back into the unit with the Filter facing outwards.
1. Press the Power Button to the Off position and unplug the unit.
2. Remove the Canister carefully. The Vent Filter is located underneath it.
3. Gently squeeze spring inward and lift to remove spring. Gently lift and remove vent filter.
4. To clean the Filter, wash in mild soap and water; rinse and
dry thoroughly before assembly.
5. Insert the Vent Filter back under the Spring to ensure it is secure.
The Canister should be washed periodically.
1. Wash the Bin in warm water using a mild soap. Avoid harsh or abrasive cleaners or sponges.
Rinse thoroughly.
TO AVOID DAMAGE, DO NOT PLACE CANISTER IN THE DISHWASHER.
2. Let it air dry. Make sure the Canister is completely dry before putting it back into the EyeVac Professional.
3. Insert the assembled Canister following the instructions outlined in the User Manual
1. Unplug unit and clean Canister and all Filters before storing.
2. Store EyeVac Professional indoors, in a clean, dry place.
3. Never store EyeVac Professional while it is still plugged in. Never wrap cord tightly around the appliance,
use the Cord Storage area on the back of the EyeVac Professional unit. Do not put any stress on the cord
where it enters the unit, as it could cause the cord to break.
WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT USE OUTDOORS OR ON WET SURFACES.