Exxentric kPulley2, Руководство пользователя, Страница: 11 / 24

11
kPulley2 Manual v2.5.0 Attaching the Drive Belt
ATTACHING THE DRIVE BELT
Step 1
Pull out the drive belt, the Exxentric logo should face
the beam as seen in the second image below.
Step 3
Take the small pulley block, pull the drive belt
around the black wheel and then back towards the
height adjustment pulley.
Step 5
Pull the drive belt in through the upper slot of the
belt stop and then out through the lower slot.
Step 2
Keep the logo of the drive belt facing the beam. Pull
the drive belt behind the bottom wheel of the height
adjustment pulley, over the bottom wheel and then
horizontally outwards from the beam.
Step 4
Pull the drive belt over the upper plastic wheel,
under the metal rod and then up towards the belt
stop.
Step 6
Put the magnetic piece of the drive belt on the
beam and start training!
Scan for a video
tutorial on these
steps!
Turn logo to
face the beam