Extron electronics XTP T VGA, Руководство пользователя

Страница: 27 / 42

XTP T VGA Transmitter • SIS Configuration and Control 19
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Horizontal shift
Set horizontal shift EX(
HCTR
}
Hctr
X(] Set the horizontal location of the first
active pixel.
Increase value
E
+HCTR
}
Hctr
X(]
Move the image to the right by one.
Decrease value E
-HCTR
}
Hctr
X(] Move the image to the left by one.
View horizontal shift E
HCTR
}
Hctr
X(] Show the horizontal location of the
first active pixel.
Vertical shift
Set vertical shift
EX(
VCTR
}
Vctr
X(]
Set the vertical location of the first
active pixel.
Increase value E
+VCTR
}
Vctr
X(] Move the image down by one.
Decrease value
E
-VCTR
}
Vctr
X(]
Move the image up by one.
View vertical shift
E
VCTR
}
Vctr
X(]
Show vertical location of the first
active pixel.
Image reset
Execute an image reset
1A
Aadj1
] Set picture adjustment settings to
the default values.
Preset Commands
Save an input preset
X1)
, Spr
X1)]
Save the current configuration to
preset
X1)
.
Recall an input preset X1)
. Rpr
X1)]
Recall the preset
X1)
configuration.
Auto memories
Set auto memories EX1!
AMEM
}
Amem
X1!] Enable or disable auto memory.
View setting E
AMEM
}
Amem
X1!] View the auto memories status.
EDID Commands
NOTE: For EDID management, use the XTP System Configuration Software (see EDID Minder on page 3 1 ).
KEY:
X(
= Horizontal or vertical shift
0
to
65535
(
32768
= default)
X1)
= Preset number
1
to
8
X1!
= Enable or disable
0
= disabled
1
= enabled (default)