Extron electronics XTP T HWP 101 4K, Руководство пользователя

Страница: 38 / 44

XTP T HWP 101 4K Wallplate Transmitter • Configuration Software 30
Device Settings
The transmitter
Device Settings
screen allows a user to view and edit various device
settings of the transmitter connected to the host device.
Click the
Device Settings
icon (see figure 26,
1
) on the
Global Navigation Bar
to
open the
Device Settings
screen.
Transmitter Device Settings Screen
Video panel
2
Video input — Select the
HDCP Authorized
check box to set the input as an HDCP
authorized device or deselect it to indicate that the device is not an HDCP authorized
device. By default, the check box is selected.
Factory reset
3
Factory Reset — Click the
Factory Reset
button to reset the transmitter to factory
settings except for firmware (see mode 5 in Reset Modes on page 17).
NOTE: This is the same as the
E
ZXXX
SIS command (see the Reset mode SIS
command on page 22).