XTP SR HDMI Scaling Receiver • XTP System Configuration Software
35
Menu Bar
The menu bar contains three menus for configuring software settings.
File menu
The
File
menu contains options for disconnecting from the switcher and exiting the
program. To access the menu, click the
File
menu.
Figure 23.
File Menu
Disconnect
This option disconnects the connected device from the XTP System Configuration Software.
From the
File
menu, select
Disconnect
. The
Connections
screen opens.
NOTE:
If the device is already disconnected, the
Disconnect
option is disabled until a
device is connected.
Exit
This option disconnects the switcher from the software and closes the application.
From the
File
menu, select
Exit
. The application closes.
Tools menu
The
Tools
menu contains an option for updating firmware. To access this menu, click the
Tools
menu.
Figure 24.
Tools Menu
NOTE:
The
Backup and Restore
and
Commissioning Report
options are not
available when the computer is directly connected to the XTP SR HDMI. See an XTP
matrix switcher user guide (
) for more information on these features.
