Extron electronics XTP SR HDMI, Руководство пользователя

Страница: 36 / 54

XTP SR HDMI Scaling Receiver • SIS Configuration and Control 30
Command ASCII Command
(host to XTP)
Response
(XTP to host)
Additional Description
Auto memories
Set auto memories
EX(
AMEM
}
Amem
X(]
Enable or disable auto memory.
View setting
E
AMEM
}
Amem
X(]
View the auto memories status.
Advanced Configuration Commands
Front Panel Lockout (Executive) mode
Enable executive mode
1X
Exe1
] Lock the entire front panel.
Disable executive mode
0X
Exe0
] Unlock the front panel.
View executive mode
status
X
Exe
X!] View the executive mode status.
Relay control
Pulse relay X2)
*3*
X2!
O Rly
X2)
*
X!]
Pulse relay
X2)
for a duration of
X2!
.
Toggle relay X2)
*2O Rly
X2)
*
X!]
Toggle relay
X2)
.
Turn relay on X2)
*1O Rly
X2)
*1
]
Turn relay
X2)
on.
Turn relay off X2)
*0O Rly
X2)
*0
]
Turn relay
X2)
off.
View relay status X2)
O Rly
X2)
*
X!] View relay status.
Aspect ratio
Set aspect ratio to Fill
E
1ASPR
}
Aspr1
]
Fill the entire output raster.
Set aspect ratio to
Follow
E
2ASPR
}
Aspr2
]
Use the native aspect ratio of the input.
View aspect ratio
setting E
ASPR
}
Aspr
X2#] View the current aspect ratio setting.
Switch mute
NOTE: The basic mute specifies the mute duration when switching. The advanced mute adds an additional
mute to help compensate for switching between different input resolutions.
Set switch mute EX3@
*
X3#
AUTB
}
Autb
X3@
*
X3#] Set the mute duration between switching
inputs.
View switch mute
setting E
AUTB
}
Autb
X3@
*
X3#] View the basic and advanced mute
durations between switching inputs.
KEY:
X!
= Enable or disable
0
= disabled or off (default)
1
= enabled or on
X(
= Enable or disable
0
= disabled
1
= enabled (default)
X2)
= Relay
1
= relay 1
2
= relay 2
X2!
= Pulse time
1
to
65535
(in 16 ms steps)
X2#
= Output aspect ratio
1
= fill (default)
2
= follow
X3@
= Basic mute
0
-
255
where 1 step = 100 ms or 10 steps = 1 s
(
0
= default)
X3#
= Advanced mute
0
-
255
where 1 step = 100 ms or 10 steps = 1 s
(
0
= default)