Extron electronics XTP SR HDMI, Руководство пользователя

Страница: 34 / 54

XTP SR HDMI Scaling Receiver • SIS Configuration and Control 28
Command ASCII Command
(host to XTP)
Response
(XTP to host)
Additional Description
Output Configuration Commands
Output scaler rate
Set output rate
EX3$
RATE
}
Rate
X3$]
Select output resolution and refresh rate.
View output rate
E
RATE
}
Rate
X3$]
Show selected output rate.
HDMI output format
Set HDMI output format
EX1)
VTPO
}
Vtpo
X1)]
Set the output color space and format.
View HDMI output
format
E
VTPO
}
Vtpo
X1)]
View the output color space and format.
Test pattern
NOTE: See
figure 16
on page 21 for examples of the available test patterns.
Set pattern
X1!
J Tst
X1!]
Set the test pattern to
X1!
.
View test pattern
J
Tst
X1!] View the current test pattern.
Video bit depth
Set video bit depth
E
V
X1@
BITD
}
BitdV
X1@]
Set the video bit depth.
View video bit depth
E
VBITD
}
BitdV
X1@]
View the video bit depth.
Freeze
Enable
1F
Frz1
]
Freeze the selected input.
Disable
0F
Frz0
]
Unfreeze the selected input.
View freeze status
F
Frz
X!]
View the freeze status.
KEY:
X!
= Enable or disable 0
= disabled or off (default for freeze command)
1
= enabled or on
X1)
= HDMI output format
0
= auto (default)
1
= DVI RGB 444
2
= HDMI RGB 444 “Full”
3
= HDMI RGB 444 “Limited”
4
= HDMI YUV 444 “Full”
5
= HDMI YUV 444 “Limited”
6
= HDMI YUV 422 “Full”
7
= HDMI YUV 422 “Limited”
X1!
= Test pattern
0
= off (default)
1
= crop
2
= alternating pixels
3
= crosshatch
4
= colorbars
5
= greyscale
X1@
= Video bit depth
0
= auto (default)
1
= 8 bit
X3$
= Output scaler rate and refresh rate
See the table on page 25.