XTP SR HDMI Scaling Receiver • Operation
16
Menu Navigation Using Front Panel Controls
Menu button
— Press the
Menu
button to activate the OSD menu or close submenus
items.
Enter button
— Press the
Enter
button to select submenu items or accept changes to
settings.
Adjustment knobs
— Rotate the
Horizontal Adjustment
(
[
) knob or
Vertical
Adjustment
(
{
) knob to navigate submenus and submenu items and adjust settings.
Menu Overview
The OSD menu contains six submenus with various submenu items for adjusting settings
or viewing device information. Use the
Menu
,
Enter
, and adjustment knobs to navigate the
OSD menu.
To open the OSD menu:
1.
Connect a display device to the HDMI output connector.
2.
Press the
Menu
button to open the OSD menu.
To navigate the OSD menu:
1.
After opening the OSD menu, rotate the adjustment knobs to navigate the six
submenus. The following table shows the six submenus and their respective submenu
items.
Submenus
Submenu Items
Image Reset
Image reset
Picture
Controls
Horizontal/
vertical position
Horizontal/vertical
size
Brightness/
contrast
Detail
User Presets
Recall
Save
Input
Configuration
Total pixels
Horizontal/vertical
active pixels
Output
Configuration
Resolution
Output format
Color bit
depth
Advanced
Configuration
Test pattern
Blank
Freeze
Aspect
ratio
System
reset
2.
Press the
Enter
button to open the selected submenu.
3.
Rotate the adjustment knobs to navigate the submenu items.
4.
Press the
Enter
button to adjust or view a submenu item or press the
Menu
button to
return to the list of submenus.
To adjust a submenu item:
1.
Navigate to an adjustable submenu item and press the
Enter
button to select the
submenu item.
2.
As required, rotate the adjustment knobs or press the
Enter
button to adjust the
submenu item.
3.
Press the
Enter
button to accept the new value. Press the
Menu
button to cancel any
pending changes.
To exit the OSD menu:
While in the list of submenus, press the
Menu
button to exit the OSD menu.
