1
IMP
ORT
ANT
:
Go to www
.extr
on.com f
or the complete
user guide
, installation instructions,
and
specifications bef
ore connecting the
product to the po
wer sour
ce.
XTP T HD 4K and XTP R HD 4K • Setup Guide
The XTP T HD 4K Transmitter and XTP R HD 4K Receiver are XTP
®
extenders for video, audio, bidirectional control, and Ethernet
transmission over a shielded twisted pair cable. This guide provides instructions for an experienced installer to install and connect
the XTP T HD 4K and XTP R HD 4K.
Transmitter Connectors
Receiver Connectors
A
DC power connector
B
HDMI input connector
C
HDMI Loop-Thru connector
and HDMI audio switch
D
Analog Audio input
connector
E
RS-232 and IR Over XTP
connector
F
XTP output connector
G
LAN connector
H
DC power connector
I
XTP input connector
J
LAN connector
K
RS-232 and IR Over XTP
connector
L
HDMI output connector and
HDMI audio switch
M
Analog audio output connector
N
S/PDIF audio output connector
O
Relay connectors
Figure 1.
Rear Panel Connectors
Installation
Before starting, turn off or disconnect all equipment power sources and mount the transmitter or receiver on a table or in a rack.
Input Connections
1.
Connect a digital video source to the female HDMI connector (see figure 1,
B
) on the transmitter. It accepts HDMI, DVI (with
an appropriate adapter), or dual mode DisplayPort video signals.
NOTES:
•
Use an Extron LockIt
®
Lacing Bracket to secure HDMI cables to the rear panel connectors.
•
Video input from a DisplayPort source must be a dual mode DisplayPort source.
2.
Connect a digital video display to the HDMI Loop-thru connector (
C
) on the transmitter to locally display the input source. A
display that is not HDCP-compliant displays a green screen when HDCP-encrypted content is sent to it.
3.
Connect balanced or unbalanced stereo audio to
the 3.5 mm, 5-pole captive screw connector (
D
).
Wire the connector as shown to the right.
XTP Interconnections
1.
For the transmitter, connect a shielded twisted pair cable between the XTP output connector on the transmitter (
F
) and the
XTP input connector on an XTP twisted pair receiver or XTP matrix switcher. For the receiver, connect a shielded twisted pair
cable between the XTP input connector on the receiver (
I
) and the XTP output connector
on an XTP twisted pair transmitter or XTP matrix switcher.
ATTENTION:
Do not connect this connector to a computer data or
telecommunications network.
The XTP T HD 4K and XTP R HD 4K are compatible with shielded twisted pair (F/UTP,
SF/UTP, and S/FTP) cables. Extron recommends using the following practices to achieve
full transmission distances up to 330 feet (100 meters) and reduce transmission errors.
•
Use Extron XTP DTP 24 SF/UTP cable for the best performance. At a minimum,
Extron recommends 24 AWG, solid conductor, STP cable with a minimum bandwidth
of 400 MHz.
•
Terminate cables with shielded connectors to the TIA/EIA-T568B standard.
•
Limit the use of more than two pass-through points, which may include patch points,
punch down connectors, couplers, and power injectors. If these pass-through points are required, use shielded couplers
and punch down connectors.
POWER
12V
HDMI
0.7A MAX
Rx G
Tx
RS-232
IR
Rx
Tx
−
+
−
+
L
R
LOOP THRU
RESET
AUDIO
OFF
ON
AUDIO
XTP T HD 4K
LAN
SIG LINK
XTP OUT
INPUTS
OVER XTP
POWER
12V
1.1A MAX
Rx G
Tx
RS-232
IR
XTP R HD 4K
R
L
Rx
Tx
-
+
-
+
-
+
1
2
AUDIO
ON
AUDIO
RESET
LAN
OVER XTP
OUTPUTS
RELAYS
SIG LINK
XTP IN
HDMI
OFF
S/PDIF
XTP T HD 4K
XTP R HD 4K
A
B
C
D
E
F G
H
I J
K
L
M N O
Do not tin
the wires!
Unbalanced Stereo Input
Balanced Stereo Input
Tip
Ring
Tip
Ring
Sleeves
Tip
Sleeve
Sleeve
Tip
LR
LR
TIA/EIA-T568B
Pin Wire Color
1
White-orange
2
Orange
3
White-green
4
Blue
5
White-blue
6
Green
7
White-brown
8
Brown
12345678
RJ-45
Connector
Insert Twisted
Pair Wires
Pins:
Pin
1
2
3
4
5
6
7
8
Wire color
White-green
Green
White-orange
Blue
White-blue
Orange
White-brown
Brown
Wire color
T568A
T568B
White-orange
Orange
White-green
Blue
White-blue
Green
White-brown
Brown
